@kranfahrer so yea based on that it would appear my GPUs are running at a cool 25 C right now and my CPU around 63 C
Here is a dump of all my onboard sensors to give you an idea of the temperatures:
amdgpu-pci-4500
Adapter: PCI adapter
vddgfx: 750.00 mV
fan1: 919 RPM (min = 400 RPM, max = 3300 RPM)
edge: +27.0°C (crit = +70.0°C, hyst = -273.1°C)
(emerg = +75.0°C)
junction: +27.0°C (crit = +105.0°C, hyst = -273.1°C)
(emerg = +110.0°C)
mem: +27.0°C (crit = +95.0°C, hyst = -273.1°C)
(emerg = +100.0°C)
power1: 9.00 W (cap = 220.00 W)
amdgpu-pci-0c00
Adapter: PCI adapter
vddgfx: 750.00 mV
fan1: 928 RPM (min = 400 RPM, max = 3300 RPM)
edge: +24.0°C (crit = +70.0°C, hyst = -273.1°C)
(emerg = +75.0°C)
junction: +25.0°C (crit = +105.0°C, hyst = -273.1°C)
(emerg = +110.0°C)
mem: +25.0°C (crit = +95.0°C, hyst = -273.1°C)
(emerg = +100.0°C)
power1: 3.00 W (cap = 220.00 W)
k10temp-pci-00cb
Adapter: PCI adapter
Tctl: +63.9°C
Tdie: +36.9°C
nvme-pci-4100
Adapter: PCI adapter
Composite: +43.9°C (low = -273.1°C, high = +72.8°C)
(crit = +75.8°C)
Sensor 1: +43.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +53.9°C (low = -273.1°C, high = +65261.8°C)
nvme-pci-0900
Adapter: PCI adapter
Composite: +42.9°C (low = -273.1°C, high = +72.8°C)
(crit = +75.8°C)
Sensor 1: +42.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +50.9°C (low = -273.1°C, high = +65261.8°C)
amdgpu-pci-4800
Adapter: PCI adapter
vddgfx: 775.00 mV
fan1: 885 RPM (min = 400 RPM, max = 3300 RPM)
edge: +28.0°C (crit = +70.0°C, hyst = -273.1°C)
(emerg = +75.0°C)
junction: +30.0°C (crit = +105.0°C, hyst = -273.1°C)
(emerg = +110.0°C)
mem: +29.0°C (crit = +95.0°C, hyst = -273.1°C)
(emerg = +100.0°C)
power1: 5.00 W (cap = 220.00 W)
amdgpu-pci-0f00
Adapter: PCI adapter
vddgfx: 750.00 mV
fan1: 949 RPM (min = 400 RPM, max = 3300 RPM)
edge: +24.0°C (crit = +70.0°C, hyst = -273.1°C)
(emerg = +75.0°C)
junction: +25.0°C (crit = +105.0°C, hyst = -273.1°C)
(emerg = +110.0°C)
mem: +26.0°C (crit = +95.0°C, hyst = -273.1°C)
(emerg = +100.0°C)
power1: 11.00 W (cap = 220.00 W)
k10temp-pci-00c3
Adapter: PCI adapter
Tctl: +63.0°C
Tdie: +36.0°C
Tccd1: +62.8°C
nvme-pci-4200
Adapter: PCI adapter
Composite: +42.9°C (low = -273.1°C, high = +72.8°C)
(crit = +75.8°C)
Sensor 1: +42.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +53.9°C (low = -273.1°C, high = +65261.8°C)
@kranfahrer Ahh ok, VERY NICE cooler you have going there. My CPU is air cooled but all 4 GPUs are water cooled. The water cooling however comes built-in and sealed with the cards so no jumps or reservoirs needed.
I'm honestly not sure what temperature they run at, all I can tell you is I have yet to find a game capable of maxing it out to the point that it thermally throttles. I'll have to check next time what they run at.
You have me seriously considering that little cooling setup you have going though, whats the brand and model?
@icedquinn I dont even have the video bonding stuff configured, thought supposedly its supported on linux.I used it for GPGPU stuff. I'm not a big gamer but if i play a game im likely running it off a single GPU. Though with that said these are so overpowered I can put any game at max settings and not max these things out.
I havent tried 2077 yet though, might be worth getting it just to see how the GPUs fair.
@kranfahrer Are we talking about the weather or are you asking about the temperature of the GPUS?
@kranfahrer It works, why do you ask?
@kranfahrer Not too bad today at all, 73 F
@icedquinn Under normal circumstances I could buy that... Still think its a poor excuse to allow drinking and driving though :)
In St. Croix, one of the american virgin islands, drinking and driving is perfectly legal. I was shocked when I learned that from a bartender who encouraged me to take a beer with me for my ride home, an open one (I was driving).
Better yet when I asked her about if it was a problem having people drinking while driving she remarked that it was ok and safe because the roads on st. croix were so narrow and winding that people paid more attention and no one would speed.... didnt seem like the best of explanations to me.
@icedquinn well if it were just a matter of being a cooling system id have no need to stack the peltiers, they could run in parallel and would be a pretty simple deisgn.
For me its not about cooling a hot surface down to room temperature or slightly below but rather reaching cryogenic temperatures, for that you need to stack peltiers and run them in a combination of series and parallel for it to work.
@icedquinn indeed it does. But I have prototype steps to figure out first. Been struggling decide how I want to heatsink out the hot side, which will be a rather large surface overall. Im not sure if the space is too tight to just throw a air heatsink on and call it a day. I'm debating making it modular and using liqduid cooling for all sections and then air cool the liquid
@icedquinn Oh I didnt even buy the CNC yet... still shopping. Sooooo many options. It is a big purchase so im trying not to rush it.
@icedquinn You are going to need to be a bit more specific than that, I have several "science machines" :)
@jmw150 I didnt write it. But here is the info on the bulk of it:
https://www.labnol.org/internet/gmail-unsubscribe/28806/
Only thing i added was I went into gmail and created a filter that automatically adds the "Unsubscribe" label to any email that doesnt have it. Told the filter to apply to past emails as well as new ones. That way the script I linked will process 100% of emails. Luckily it wont act on ones it cant figure out a way to unsubscribe to, so shouldnt be spamming your friends or anything.
Jeffrey Phillips Freeman
Innovator & Entrepreneur in Machine Learning, Evolutionary Computing & Big Data. Avid SCUBA diver, Open-source developer, HAM radio operator, astrophotographer, and anything nerdy.
Born and raised in Philadelphia, PA, USA, currently living in Utrecht, Netherlands, USA, and Thailand. Was also living in Israel, but left.
Pronouns: Sir / Mister
(Above pronouns are not intended to mock, i will respect any persons pronouns and only wish pronouns to show respect be used with me as well. These are called neopronouns, see an example of the word "frog" used as a neopronoun here: http://tinyurl.com/44hhej89 )
A proud member of the Penobscot Native American tribe, as well as a Mayflower passenger descendant. I sometimes post about my genealogical history.
My stance on various issues:
Education: Free to PhD, tax paid
Abortion: Protected, tax paid, limited time-frame
Welfare: Yes, no one should starve
UBI: No, use welfare
Racism: is real
Guns: Shall not be infringed
LGBT+/minorities: Support
Pronouns: Will respect
Trump: Moron, evil
Biden: Senile, racist
Police: ACAB
Drugs: Fully legal, no prescriptions needed
GPG/PGP Fingerprint: 8B23 64CD 2403 6DCB 7531 01D0 052D DA8E 0506 CBCE