Show newer

Fried rice protip: Always make your fried rice dirty, you wont regret it. That is add roux, or if you don't have any, nut paste. I actually prefer the nut paste, just blend up some walnuts and almonds and your good to go but you can experiment with other nuts too.

Easily makes any fried rice twice as good.

@PCOWandre that would get too expensive over the long term, especially considering that there may be many design iterations. Plus the CNC is likely to also enable me to do PCB and other things.

If nothing else having my own CNC is going to greatly reduce turn around and thus reduce project development time significantly.

@PCOWandre I already knew going in that the cheap stuff wasnt an option, particularly given my high resolution requirements. Precision machining is never going to be cheap.

@PCOWandre ok so yea that sounds troubling and speaks to quiality issues... so might not want to go that route then thanks.

@PCOWandre There is also the fact that the free tier requires the work to be non-commercial... So im not sure how that would play out if someonewanted to contribute to an open-source project and they were using that open-source project commercially to make a product they actually sell (like an open-source enclosure they use on a paid product).

@PCOWandre Ahhh ok, well that makes more sense. If that is the case it **might** be acceptable... but its still hairy for me because if they change that policy at any time I could have a huge collection of projects that all of a sudden are inaccessible without paying a huge fee.

If this were desktop software that might not even be a big deal because if they stopped offering a free tier you could always just use an older version. But it is web based, and I suspect this is part of the reason. So if they pull the free tier at any point you either need to pay or instantly get locked out of everything you ever made (and the community too)... thats a big gamble, it is hard to predict where that will go in 5 years time for example.

@icedquinn

Right, I got that.

openscad languages limitation might be an issue, and something that generates the openscad code does sound like the right solution. Though im not sure I'd want to roll my own.

From the look of it im not sure openscad format is a "language" at all. There doesnt seem to be conditional logic or any of the elements of a turing complete language. Looks more like a file format for defining shapes.. I'd put it in the same vein as something like the file format for SVGs.

@meowski

@PCOWandre

I am not seeing anything about a free tier here:

autodesk.com/products/fusion-3

If I can find the truely free tier you speak of I might be ok with it not being opensource.. All I know is when i looked i dont see it and the "free" tier I was able to get and currently have explicitly stated it was only granted for a year.

@icedquinn

From what ive seen so far OpenSCAD right now is looking like my favorite...

@meowski

@icedquinn

As much as I love functional programming clojure, and even more so lisp, just make my skin crawl. If it used any other functional language I would jump on that in a heartbeat!

Most models I am likely to do will be geometrically simple. A lot of it will be enclosures. Its unlikely I will have too much need to do anything "artistic" where there is a lot of fine detail. The only reason i need high resolution of 0.1mm isnt for fine detail but rather for precision fitting of parts. though also ensuring surfaces are relatively smooth is part of that.

@meowski

@ejg indeed, in fact in my notes/todo for this task (improving my workshop) using a makerspace is one of the points I have that I am considering.

One strong motivator for me to use a makerspace is simply that my labs and workspaces at the moment are all at my philly home but I spend more time away from philly than at philly.

So what I will likely wind up doing is buy a CNC and 3d printer for philly and then rely on maker spaces when im in the netherlands. There are some amazing ones with high end tech.

That said, sadly the makerspaces near and in philly that I've seen arent nearly as nice as the ones in and around Utrecht. So I will almost certainly still need to buy my own machines even if i wind up using a makerspace in the netherlands.

@icedquinn

hmm openscad sounds interesting, but "all code" sounds restrictive. Would be nice to see some sort of cross where you define the shapes in code and coordinates, it renders it in a 3d image to see, and you could manipulate it with it hte mouse to tweak the coordinate values.

The nice part about all code would be that it would be git/merge friendly (huge plus), AND would make it way easier to dynamically change the design if you needed each print out to be slightly different. For example if i did an arduino case I might need to 4 different designs depending on how many stacked modules are on the arduino. So instead of designing 4 different cases that were similar and maintaining them all in parallel I could just design it once and have the height as a parameter.

So yea openscad or something similar in nature sounds appealing, but as you said also sounds tedious if you really have to do it **all** in code.

@meowski

@icedquinn

I am not trying to build a single thing. Thats the problem. The projects ill need to build will change as quickly as the direction of the wind as I have diverse hobby and professional needs.

For example one thing i need to build is the framework for a cryogenic cooling system, which will mostly be done with the CNC cutting out metal struts and such. Another thing I'd like to build is a smart chess board and chess pieces, yet another is a peltier powered near-cryogenic liquid-cooler (basically a 3 or 4 level stacked peltier configuration)...

so yea, ill be building all sorts of things and thus need a pretty versatile setup.

@meowski

@icedquinn

might be worth looking at blender then.. I dunno blender just feels like a tool not intended for this purpose and any plugins that try to fix that wont be as good as picking a tool actually intended for engineering design.

@meowski

@icedquinn To clarify I know that on the 3d printer I'm looking for a bare minimum of 0.1mm resolution or better. I know that rules out most printers that are less expensive,especially when you couple it with my need for a relativly large printing volume.

@icedquinn ahh ok, i was looking at the software by the same name. cool. I think for a 3d printer im going to need high-resolution and dual filament as minimum requirements... I will likely need a pretty generous size as ill probably be printing relatively large objects.

@icedquinn

Does Scerchok enable things like solids of revolution designs? One of the thing that was nice about fusion 360 is you could basically just create solids from 2d sketches by applying things like a solid of revolution to it. I presume for blender to be useful it would have to do the same, perhaps this plugin adds that?

@meowski

@icedquinn Ahh just checked, Prusa is the slicer, not the design software... ok still useful but I assume all slicers work ont he same file formats so I think picking the design software might be the more critical decision here, correct me if im wrong.

Show older
CleverLibre Social

CleverLibre Social is an inclusive social instance for open discussion, learning, and community.
All cultures welcome.
Hate speech and harassment strictly forbidden.