Lup Yuen Lee 李立源 @lupyuen@social.cleverlibre.org

How we configure #LoRa Parameters for #PineDio USB

https://lupyuen.github.io/articles/usb?9#lora-parameters

How do we make the same #LoRa SX1262 Driver run on #PineDio USB and PineDio Stack BL604? ... With Layers of Platform Dependent and Independent Code (Like Shrek)

https://lupyuen.github.io/articles/usb?8#source-files-for-linux

Here are the #LoRa SX1262 Register Values ... Read by our #PineDio USB Driver

https://lupyuen.github.io/articles/usb?7#run-the-driver

Here's how we read the #LoRa SX1262 Registers on #PineDio USB Dongle

https://lupyuen.github.io/articles/usb?6#read-sx1262-registers

"TinyGS is an open network of Ground Stations distributed around the world to receive and operate #LoRa satellites, weather probes and other flying objects"

https://tinygs.com/

#PineDio USB Dongle runs the exact same #LoRa SX1262 Driver ... As #PineDio Stack BL604!

https://lupyuen.github.io/articles/usb?3#lora-sx1262-driver-for-pinedio-usb

What's inside #PineDio USB Dongle? CH341 connected to #LoRa SX1262 (over SPI)

https://lupyuen.github.io/articles/usb?2#pinedio-lora-usb-adapter

Building a #LoRa SX1262 Driver for #PineDio USB Adapter @PINE64 ... And testing it on Pinebook Pro ... All shall be explained in this article

https://lupyuen.github.io/articles/usb?1

We now have a Linux Driver for #PineDio #LoRa USB Dongle @PINE64 ... That can transmit 29-byte messages and receive 28-byte messages ... Tested on Pinebook Pro Manjaro Arm64 🎉

https://github.com/lupyuen/lora-sx1262

Why does #PineDio USB Dongle receive 28-byte #LoRa Messages ... But not longer messages? Because CH341 can only transfer up to 31 bytes of SPI data ... And we need 3 bytes for the SX1262 Command Header

https://github.com/lupyuen/lora-sx1262#receive-message

#PineDio USB Dongle @PINE64 successfully receives 28-byte #LoRa Message ... From RAKwireless WisBlock! 🎉

https://github.com/lupyuen/lora-sx1262#receive-message

#PineDio USB Dongle shall now receive a #LoRa Message ... From RAKwireless WisBlock

https://github.com/lupyuen/lora-sx1262/blob/master/src/main.c#L74-L119

CH341 doesn't seem to support 32-byte SPI Transfers ... Hope this fixes @JF's #PineDio #LoRa USB Dongle! 👍

https://github.com/lupyuen/lora-sx1262/blob/master/src/sx126x-linux.c#L665-L687

Aha! When #PineDio Dongle sends a 29-byte #LoRa Packet to RAKwireless WisBlock ... It's received OK! Anything more will be garbled 🤔

https://github.com/lupyuen/lora-sx1262#wisblock-receiver-log

#PineDio Dongle sends a 64-byte #LoRa Packet ... But the 64-byte Packet doesn't appear in the dmesg Log for CH341 SPI Driver 🤔

https://github.com/lupyuen/lora-sx1262#pinedio-usb-dmesg-log

But #LoRa Messages sent by #PineDio Stack BL604 to RAKwireless WisBlock are not garbled ... Even though PineDio Stack and PineDio Dongle are running the same SX1262 Driver Code! 🤔

https://lupyuen.github.io/articles/lorawan#configure-lora-transceiver

#PineDio USB Dongle sends #LoRa Packet to RAKwireless WisBlock ... But received packet is consistently garbled ... As reported by @JF 🤔

https://github.com/lupyuen/lora-sx1262#wisblock-receiver-log

#PineDio USB Dongle @PINE64 transmits a #LoRa Packet ... Which appears as a LoRa Chirp on Airspy SDR! 🎉

https://github.com/lupyuen/lora-sx1262/blob/master/src/main.c

Let's transmit a #LoRa Message on #PineDio USB Dongle with these settings ... Connected to Pinebook Pro

https://github.com/lupyuen/lora-sx1262/blob/master/src/main.c

Oops just discovered that the new Semtech Reference Driver doesn't support LoRaWAN ... So we switched to the older #LoRa SX1262 Driver ... Exact same driver used by BL602!

https://github.com/lupyuen/lora-sx1262