Lup Yuen Lee 李立源 @lupyuen@social.cleverlibre.org

We have just transmitted data from #PineDio Stack BL604 to #TheThingsNetwork Cloud over LoRa ... For Free! (Assuming we have The Things Network coverage)

https://www.thethingsnetwork.org/

#TheThingsNetwork receives the data transmitted by #PineDio Stack BL604 thru our LoRaWAN Firmware yay! 🎉

https://github.com/lupyuen/bl_iot_sdk/blob/pinedio/customer_app/pinedio_lorawan#lorawan-commands-for-the-things-network

Now we send data from #PineDio Stack BL604 to #TheThingsNetwork ... Here are the commands for our LoRaWAN Firmware

https://github.com/lupyuen/bl_iot_sdk/blob/pinedio/customer_app/pinedio_lorawan#lorawan-commands-for-the-things-network

#PineDio Stack BL604 successfully joins #TheThingsNetwork thru our LoRaWAN Firmware yay! 🎉

https://github.com/lupyuen/bl_iot_sdk/blob/pinedio/customer_app/pinedio_lorawan#lorawan-commands-for-the-things-network

To join #PineDio Stack BL604 to #TheThingsNetwork, boot the LoRaWAN Firmware and enter these commands

https://github.com/lupyuen/bl_iot_sdk/blob/pinedio/customer_app/pinedio_lorawan#lorawan-commands-for-the-things-network

From our #TheThingsNetwork Device, copy the AppEUI, DevEUI and AppKey ... We'll enter these into the LoRaWAN Firmware for #PineDio Stack

https://www.thethingsindustries.com/docs/devices/adding-devices/

Why set LoRaWAN Version to "1.0.2 Rev B"? Because #TheThingsNetwork has been upgraded recently ... Setting the incorrect LoRaWAN Version will cause Message Integrity Code errors! (I tried)

https://www.thethingsindustries.com/docs/getting-started/migrating/major-changes/#lorawan-support

First look at Microchip PolarFire SoC FPGA Icicle #RISCV board

https://www.cnx-software.com/2021/09/17/microchip-polarfire-soc-icicle-fpga-risc-v-development-board-review/

Let #TheThingsNetwork generate the Security Keys for our LoRaWAN End Device

https://www.thethingsindustries.com/docs/devices/adding-devices/

Under our #TheThingsNetwork Application, add an End Device ... LoRaWAN Version MUST be "1.0.2" and "1.0.2 Rev B" ... Or we will get Message Integrity Code errors!

https://www.thethingsindustries.com/docs/getting-started/migrating/major-changes/#lorawan-support

@kirk Yeah I completely understand ... That's how I got hospitalised from overwork

But I'll probably force myself and do "007" 🤔

"We don't do 996" 👍

Updates to #GoLang Code of Conduct

https://go.dev/blog/conduct-2021

GoLang Engineer in Hangzhou... 🤔

To receive Sensor Data, we create an Application in #TheThingsNetwork

https://www.thethingsindustries.com/docs/integrations/adding-applications/

We should see Heartbeat Messages transmitted by our LoRaWAN Gateway to #TheThingsNetwork ... Maybe messages from nearby devices!

https://www.thethingsindustries.com/docs/getting-started/events/

Updated LoRaWAN Gateway Settings may be found in the #TheThingsNetwork Console

https://www.thethingsindustries.com/docs/gateways/udp/

With the new version of #TheThingsNetwork, we need to edit "global_conf.json" and update the "server_address" ... This is missing from the RAKWireless docs

https://www.thethingsnetwork.org/docs/the-things-stack/migrate-to-v3/migrate-gateways/