Follow these steps to connect our RAKwireless #LoRaWAN Dev Gateway to #TheThingsNetwork
With the new version of #TheThingsNetwork, we need to edit "global_conf.json" and update the "server_address" ... This is missing from the RAKWireless docs
https://www.thethingsnetwork.org/docs/the-things-stack/migrate-to-v3/migrate-gateways/
Updated LoRaWAN Gateway Settings may be found in the #TheThingsNetwork Console
We should see Heartbeat Messages transmitted by our LoRaWAN Gateway to #TheThingsNetwork ... Maybe messages from nearby devices!
https://www.thethingsindustries.com/docs/getting-started/events/
To receive Sensor Data, we create an Application in #TheThingsNetwork
https://www.thethingsindustries.com/docs/integrations/adding-applications/
Under our #TheThingsNetwork Application, add an End Device ... LoRaWAN Version MUST be "1.0.2" and "1.0.2 Rev B" ... Or we will get Message Integrity Code errors!
https://www.thethingsindustries.com/docs/getting-started/migrating/major-changes/#lorawan-support
Let #TheThingsNetwork generate the Security Keys for our LoRaWAN End Device
https://www.thethingsindustries.com/docs/devices/adding-devices/
Why set LoRaWAN Version to "1.0.2 Rev B"? Because #TheThingsNetwork has been upgraded recently ... Setting the incorrect LoRaWAN Version will cause Message Integrity Code errors! (I tried)
https://www.thethingsindustries.com/docs/getting-started/migrating/major-changes/#lorawan-support
From our #TheThingsNetwork Device, copy the AppEUI, DevEUI and AppKey ... We'll enter these into the LoRaWAN Firmware for #PineDio Stack
https://www.thethingsindustries.com/docs/devices/adding-devices/
To join #PineDio Stack BL604 to #TheThingsNetwork, boot the LoRaWAN Firmware and enter these commands
#PineDio Stack BL604 successfully joins #TheThingsNetwork thru our LoRaWAN Firmware yay! 🎉
Now we send data from #PineDio Stack BL604 to #TheThingsNetwork ... Here are the commands for our LoRaWAN Firmware
#TheThingsNetwork receives the data transmitted by #PineDio Stack BL604 thru our LoRaWAN Firmware yay! 🎉
We have just transmitted data from #PineDio Stack BL604 to #TheThingsNetwork Cloud over LoRa ... For Free! (Assuming we have The Things Network coverage)
I hope you have good #TheThingsNetwork Wireless Coverage in your area ...Coverage in Singapore is so spotty 😭
No coverage for #TheThingsNetwork? No worries ... You're welcome to add your own #LoRaWAN Gateway to the network!
How we add a RAKWireless #LoRaWAN Gateway to #TheThingsNetwork
https://lupyuen.github.io/articles/ttn?3#add-gateway-to-the-things-network
Remember to set the Server Address ... When adding @RAKwireless LoRaWAN Gateway to #TheThingsNetwork
Checking if our #LoRaWAN Gateway is connected to #TheThingsNetwork
Creating a Device in #TheThingsNetwork for #PineDio Stack BL604
https://lupyuen.github.io/articles/ttn?6#add-device-to-the-things-network
#TheThingsNetwork LoRaWAN Version for #PineDio Stack must be "1.0.2 Rev B" ... Or we'll get Message Integrity Code errors!
https://lupyuen.github.io/articles/ttn?6#add-device-to-the-things-network
#TheThingsNetwork Firmware for #PineDio Stack BL604 ... Yep the same LoRaWAN Firmware ported from Mynewt OS to BL602!
https://lupyuen.github.io/articles/ttn?7#run-the-lorawan-firmware
#PineDio Stack BL604 successfully joins #TheThingsNetwork yay!
Doing more in the Cloud ... With #PineDio Stack BL604 and #TheThingsNetwork
Extending #TheThingsNetwork coverage ... Here's how we can help!
https://lupyuen.github.io/articles/ttn?12#the-things-network-coverage
How many messages (per hour) can we send to #TheThingsNetwork?
https://lupyuen.github.io/articles/ttn?15#fair-use-of-the-things-network
What's next for #TheThingsNetwork on #PineDio Stack BL604? #Grafana, MQTT and CBOR!
Here's how we transmit Sensor Data from #PineDio Stack BL604 #RISCV Board to #TheThingsNetwork, the public LoRa network
Connecting #PineDio Stack BL604 @PINE64 to #TheThingsNetwork ... All shall be explained in this article
https://lupyuen.github.io/articles/ttn?1