#NuttX BMP280 Driver appears as "/dev/sensor/baro0" ... Let's read the device

https://github.com/lupyuen/bme280-nuttx#bmp280-driver-loads-ok

We enable the #NuttX Sensor Test App ... To test the BMP280 Driver

https://github.com/lupyuen/bme280-nuttx#run-sensor-test-app

#NuttX BMP280 Driver says it's 29 °C with air pressure 1,006 millibars ... Yep looks right for Sunny Singapore by the Seaside 👍

https://github.com/lupyuen/bme280-nuttx#run-sensor-test-app

#NuttX BMP280 Driver works OK with our BME280 Sensor ... But we're missing one thing: Humidity ... Can we port the BME280 Driver from Zephyr OS? 🤔

https://github.com/lupyuen/bme280-nuttx#port-bme280-driver-from-zephyr-os

Zephyr BME280 Driver looks similar to #NuttX BMP280 Driver ... So porting Zephyr BME280 Driver to NuttX might not be so hard 🤔

https://github.com/lupyuen/bme280-nuttx#port-bme280-driver-from-zephyr-os

Zephyr BME280 Driver builds OK on #NuttX (with a few tweaks) 🎉 ... Now we wrap the Zephyr Driver as a NuttX Driver

https://github.com/lupyuen/bme280-nuttx#wrap-zephyr-driver-as-nuttx-driver

Our #NuttX Driver Wrapper wraps around the Zephyr BME280 Driver ... So it works like a NuttX Driver

https://github.com/lupyuen/bme280-nuttx#wrap-zephyr-driver-as-nuttx-driver

Our #NuttX BME280 Driver reads the Sensor Data from Zephyr Driver in two steps: 1️⃣ Fetch the sensor sample 2️⃣ Get the channel data

https://github.com/lupyuen/bme280-nuttx#read-sensor-data-from-zephyr-driver

Power Management works a little differently in #NuttX vs Zephyr ... Here's how our NuttX BME280 Driver calls the Zephyr Driver to do Power Management

https://github.com/lupyuen/bme280-nuttx#power-management

BME280 Standby Duration is static in Zephyr but configured at runtime in #NuttX ... So we set it in our NuttX BME280 Driver

https://github.com/lupyuen/bme280-nuttx#standby-duration

Zephyr BME280 Driver ported to Apache #NuttX OS ... Works great on NuttX! 🎉

https://github.com/lupyuen/bme280-nuttx#output-log

We made minimal changes to Zephyr BME280 Driver while porting to #NuttX OS

https://github.com/lupyuen/bme280-nuttx#zephyr-driver-modified-for-nuttx

#NuttX doesn't have a Sensor Type that supports BME280 Temperature + Humidity + Pressure ... So our NuttX BME280 Driver combines 2 Sensor Types: 1️⃣ Barometer Sensor (Pressure + Temperature) 2️⃣ Humidity Sensor

https://github.com/lupyuen/bme280-nuttx#combined-barometer-and-humidity-sensor

Each #NuttX Sensor defines its operations for 1️⃣ Activating the sensor 2️⃣ Fetching sensor data 3️⃣ Setting the standby interval

https://github.com/lupyuen/bme280-nuttx#combined-barometer-and-humidity-sensor

At #NuttX Startup we register both BME280 sensors: Barometer Sensor and Humidity Sensor

https://github.com/lupyuen/bme280-nuttx#combined-barometer-and-humidity-sensor

Our #NuttX BME280 Driver appears as 2 sensors: 1️⃣ "/dev/sensor/baro0" (Barometer Sensor) 2️⃣ "/dev/sensor/humi0" (Humidity Sensor) ... Here's how we read the Air Pressure, Temperature and Humidity

https://github.com/lupyuen/bme280-nuttx#combined-barometer-and-humidity-sensor

Porting the #BME280 Driver from Zephyr OS to Apache #NuttX OS ... All shall be explained in this article

https://lupyuen.github.io/articles/bme280?1

Here's how we connect BME280 Sensor (Temperature / Humidity / Air Pressure) ... To PineCone #BL602 @PINE64

https://lupyuen.github.io/articles/bme280?2#test-and-connect-bme280