#ZigLang prints #NuttX Sensor Data as Fixed-Point Numbers

https://github.com/lupyuen/visual-zig-nuttx#floating-point-link-error

Oops here's the correct algo ... Tested OK with #ZigLang "comptime" and "@compileLog" 👍

https://github.com/lupyuen/visual-zig-nuttx/blob/b4a0ce4ae0e518e705d0de1437a32e201a7b0c50/sensor.zig#L40-L50

#ZigLang reads a #NuttX Barometer and Humidity Sensor (Bosch BME280)

https://github.com/lupyuen/visual-zig-nuttx#read-barometer-sensor

Back to #RISCV PineCone #BL602 @PINE64 ... With Bosch BME280 Temperature / Humidity / Air Pressure Sensor

https://github.com/lupyuen/visual-zig-nuttx#connect-bme280-sensor

#ZigLang reads BME280 Sensor ... With Apache #NuttX RTOS on #RISCV #BL602 ... All shall be explained in this article

https://lupyuen.github.io/articles/sensor?1

Apache #NuttX RTOS shows BME280 Sensor as 2 devices ... "baro0" and "humi0"

https://lupyuen.github.io/articles/sensor?2#bosch-bme280-sensor

Reading Sensor Data on Apache #NuttX RTOS ... Here are the steps

https://lupyuen.github.io/articles/sensor?3#read-barometer-sensor

#ZigLang has a "defer" feature ... Super handy for cleaning up! 👍

https://lupyuen.github.io/articles/sensor?4#close-sensor-device-deferred

#ZigLang reads the #NuttX Sensor Data and converts to Fixed-Point Numbers

https://lupyuen.github.io/articles/sensor?5#read-sensor-data

#ZigLang reads the BME280 Humidity Sensor on Apache #NuttX RTOS

https://lupyuen.github.io/articles/sensor?6#read-humidity-sensor

Here's how we import #NuttX Functions into #ZigLang

https://lupyuen.github.io/articles/sensor?7#import-nuttx-functions

Main Function of our #ZigLang Sensor App for Apache #NuttX RTOS

https://lupyuen.github.io/articles/sensor?8#main-function

#ZigLang Slice is a Pointer and a Length

https://lupyuen.github.io/articles/sensor?9#slice-vs-string

Here's why #ZigLang Slices are a little safer than C Strings

https://lupyuen.github.io/articles/sensor?9#slice-vs-string

Connecting Bosch BME280 Sensor to #RISCV PineCone #BL602

https://lupyuen.github.io/articles/sensor?10#connect-bme280-sensor

Compiling our #ZigLang Sensor App for Apache #NuttX RTOS

https://lupyuen.github.io/articles/sensor?11#compile-zig-app

#ZigLang Sensor App reads BME280 Sensor on Apache #NuttX RTOS 🎉

https://lupyuen.github.io/articles/sensor?12#run-zig-app

Our #ZigLang Sensor App works for other #NuttX Sensors too

https://lupyuen.github.io/articles/sensor?15#multiple-sensors

@lupyuen Many of these do internally behave like separate sensors, so this can make sense. The last one I implemented for @RIOT_OS (LSM303AGR, in #RustLang) also shows as an accelerometer and a separate magnetometer.

@lupyuen That's a slick feature! It should cut down on the number of instructions used as well as the amount of high level code used.